Hey,
I'm installing the cgru package on my workstation (Linux Mint 18.1) but can't get Keeper to start properly.
It works fine on my other machine and server (all running the same OS).
It tries to start and I get a black icon, and eventually the CGRU icon appears but doesn't respond and eventually just disappears again.
Here's the output it spits out in terminal:
CGRU_VERSION 2.2.1 : '/opt/cgru'
Certificate file "/opt/cgru/utilities/keeper/serverhttps.pem" not found, skipping HTTPS serving.
"sni-qt/6952" WARN 15:45:16.231 void StatusNotifierItemFactory::connectToSnw() Invalid interface to SNW_SERVICE
Could not open socket.
192.168.0.142 : [Errno 110] Connection timed out
Listening 50999 port...
It look like it's trying to connect to and old server address from a previous install (2.1.0 I think).
I've tried uninstalling everything and removing the /opt/cgru folder but it still persists when reinstalling.
Which config file should I be looking for to get this fixed? Or is it a completely different issue?
Keeper not starting up
Re: Keeper not starting up
Hi.
On other machines where it works, the output is the same?
That warning exists too?
"sni-qt/6952" WARN 15:45:16.231 void StatusNotifierItemFactory::connectToSnw() Invalid interface to SNW_SERVICE
On other machines where it works, the output is the same?
That warning exists too?
"sni-qt/6952" WARN 15:45:16.231 void StatusNotifierItemFactory::connectToSnw() Invalid interface to SNW_SERVICE
Timur Hairulin
CGRU 3.3.1, Ubuntu 20.04, 22.04, MS Windows 10 (clients only).
CGRU 3.3.1, Ubuntu 20.04, 22.04, MS Windows 10 (clients only).
Re: Keeper not starting up
No, they're working fine, I think I found the culprit though.
There was a config file located in $HOME/.cgru that had the old server address hardcoded.
Typical, I spent the last two hours trying things and, of course, as soon as I posted my question I found the file.![Smile :)](./images/smilies/icon_e_smile.gif)
Once I changed that to the new one it seems to work for now.
If I notice any other issues, I'll post here.
Thanks for the quick reply though!
There was a config file located in $HOME/.cgru that had the old server address hardcoded.
Typical, I spent the last two hours trying things and, of course, as soon as I posted my question I found the file.
![Smile :)](./images/smilies/icon_e_smile.gif)
Once I changed that to the new one it seems to work for now.
If I notice any other issues, I'll post here.
Thanks for the quick reply though!
Re: Keeper not starting up
Hi,
I have the same issue but on Windows 10 machine (i tried cgru 2.3.1 and 3.1.0). I run start.cmd, keeper appears in the tray and then disappears. Where can i find error logs to see what is wrong?
Thanks.
I have the same issue but on Windows 10 machine (i tried cgru 2.3.1 and 3.1.0). I run start.cmd, keeper appears in the tray and then disappears. Where can i find error logs to see what is wrong?
Thanks.
Re: Keeper not starting up
Hi!
Try to launch Keeper in a terminal in a foreground mode.
This way you can see some error messages.
Open a cmd.exe, go to the cgru root folder and run start.cmd with any argument, for example:
Try to launch Keeper in a terminal in a foreground mode.
This way you can see some error messages.
Open a cmd.exe, go to the cgru root folder and run start.cmd with any argument, for example:
Code: Select all
start.cmd -f
Timur Hairulin
CGRU 3.3.1, Ubuntu 20.04, 22.04, MS Windows 10 (clients only).
CGRU 3.3.1, Ubuntu 20.04, 22.04, MS Windows 10 (clients only).
Re: Keeper not starting up
I ran the start.cmd from the terminal. It was missing httpsserver.pem. I generated that it and now it works!
Thanks for your help!
Thanks for your help!
Re: Keeper not starting up
Hm, strange, it should work w/o that file. I'll check it later.
Timur Hairulin
CGRU 3.3.1, Ubuntu 20.04, 22.04, MS Windows 10 (clients only).
CGRU 3.3.1, Ubuntu 20.04, 22.04, MS Windows 10 (clients only).