In the log, I have a large number of JSON parse errors for what I believe is the render info:
Code: Select all
3251: Error: JSON.parse:
3247: Unexpected token in JSON at position 1736
{
"renders": [{
"name": "d104-01",
"id": 1,
"priority": 99,
"user_name": "rendf1",
"time_register": 1559673925,
"time_launch": 0,
"time_update": 1559880938,
"address": {
"family": 4,
"ip": "10.6.111.69",
"port": 0
},
"netifs": [{
"name": "{F1AF32D1-1100-4768-8836-33C3527FB08E}",
"mac": "c8:d3:ff:be:83:ae",
"addresses": [{
"family": 4,
"ip": "10.6.111.0",
"port": 0
}, {
"family": 4,
"ip": "10.6.111.69",
"port": 0
}, {
"family": 4,
"ip": "10.6.111.255",
"port": 0
}, {
"family": 4,
"ip": "224.0.0.0",
"port": 0
}, {
"family": 4,
"ip": "255.255.255.255",
"port": 0
}]
}],
"engine": "2.3.1",
"st": 128,
"state": " OFF WWK",
"capacity_used": 0,
"task_start_finish_time": 0,
"wol_operation_time": 1559895464,
"idle_time": 1559895464,
"busy_time": 1559895464,
"host": {
"capacity": 1100,
"max_tasks": 10,
"power": 1000,
"os": "windows 64",
"nimby_idle_cpu": 10,
"nimby_busy_cpu": 50,
"nimby_idle_mem": 50,
"nimby_busy_mem": 90,
"nimby_idle_swp": 30,
"nimby_busy_swp": 80,
"nimby_idle_hddgb": 1,
"nimby_busy_hddgb": 1,
"nimby_idle_hddio": 50,
"nimby_busy_hddio": 95
}
}, {
"tasks_percents": [-1],
"name": "d102-01",
"id": 184,
"priority": 99,
"user_name": "rendf1",
"time_register": 1559894602,
"time_launch": 1559894712,
"time_update": 1559895464,
"address": {
"family": 4,
"ip": "10.6.111.34",
"port": 0
},
"netifs": [{
"name": "{54011075-23DC-402C-831C-1257798542CC}",
"mac": "b4:b5:2f:e0:7a:cb",
"addresses": [{
"family": 4,
"ip": "10.6.111.0",
"port": 0
}, {
"family": 4,
"ip": "10.6.111.34",
"port": 0
}, {
"family": 4,
"ip": "10.6.111.255",
"port": 0
}, {
"family": 4,
"ip": "224.0.0.0",
"port": 0
}, {
"family": 4,
"ip": "255.255.255.255",
"port": 0
}]
}],
"engine": "2.3.1",
"st": 9,
"state": " ONL RUN",
"capacity_used": 1000,
"task_start_finish_time": 1559895464,
"wol_operation_time": 1559894712,
"idle_time": 1559895464,
"busy_time": 1559895419,
"tasks": [{
"name": " {
"name": "d104-01",
"id": 1,
"pri",
"service": "wakeonlan",
"capacity": 1000,
"time_start": 1559895464,
"user_name": "d104-01",
"block_name": "wake-on-lan",
"job_name": "d104-01",
"job_id": 1,
"block_num": 1,
"task_num": 0
}], "host": {
"capacity": 1100,
"max_tasks": 10,
"power": 1000,
"os": "windows 64",
"nimby_idle_cpu": 10,
"nimby_busy_cpu": 50,
"nimby_idle_mem": 50,
"nimby_busy_mem": 90,
"nimby_idle_swp": 30,
"nimby_busy_swp": 80,
"nimby_idle_hddgb": 1,
"nimby_busy_hddgb": 1,
"nimby_idle_hddio": 50,
"nimby_busy_hddio": 95
}
}]
}
Code: Select all
"name": "{ "
Code: Select all
"pri":,
Code: Select all
"task_num ": 0
}],
"host ": {
"capacity ": 1100,
I'm not sure if this is something I have broken in a configuration file, but it appears to be affecting all nodes.
Any ideas would be greatly appreciated!